Specimen Catalogue

Vitreous china rimless wall-hung and floor-mounted water closets engineered for heavy commercial footfall with 3/4.5L dual-flush efficiency.

Vitreous china deep-profile Orissa squatting pan with integral footrests and high-velocity integral flushing rim.

Architectural vitreous china countertop vessel basins, under-counter bowls, and wall-hung basins with full/half pedestals.

Water-conserving wall-hung vitreous china urinals equipped with integral ceramic trapways and brass/ABS spreaders.

High-grade polymer exposed and concealed flushing cisterns with adjustable dual-flush siphons and silent fill valves.

Ergonomic quick-release toilet seat covers with soft-close hydraulic dampers and antimicrobial urea-formaldehyde resin construction.

AISI 304 heavy-gauge stainless steel single and double bowl commercial sinks with sound-deadening undercoating.

Heavy-duty matte anti-skid vitrified ceramic floor and wall tiles designed for wet washrooms and high-abrasion areas.

Heavy forged brass and engineered polymer bib taps available in standard, long-body, 2-in-1, and hose-nozzle variations.

Quarter-turn ceramic disc brass angle valves and concealed stop cocks for water supply isolation to geysers, basins, and cisterns.

Deck-mounted tall and standard basin pillar taps alongside 360° swivel swan neck faucets with honey-comb aerators.

Complete hot and cold water blending wall mixers and sink mixers with provision for hand shower or overhead shower bend.

Commercial-grade bronze vertical non-return check valve with spring-loaded seat, tested to 1.5 MPa for high-pressure water and industrial piping.

Heavy-duty bronze horizontal lift check valve tested to 1.5 MPa conforming to IS:778 standards for horizontal water lines and commercial installations.

Full-bore bronze quarter-turn ball valve featuring an adjustable flexible handle for confined spaces, compliant with ANSI, ASME, and ASTM standards.

Heavy-duty bronze gate valve manufactured to IS:778 Class-1 standards with non-rising spindle and cast iron handwheel for positive flow control.

Ergonomic trigger-operated bidet spray guns with 1.2m / 1.5m reinforced anti-twist stainless steel / braided PVC hoses.

Architectural 32mm basin waste couplings, pop-up dome plugs, and telescopic brass/PVC bottle traps with odor-sealing water barriers.

High-precision brass replacement spindles and ceramic disc cartridges for quarter-turn taps, bib cocks, and concealed diverters.

Infrared touchless automatic sensor flush valves and basin taps powered by dual AC/DC solenoids for hygienic public washrooms.

Heavy-duty quarter-turn full-bore brass and bronze ball valves with blow-out proof stems and virgin PTFE seats.

High-pressure stainless steel 1-piece, 2-piece, and 3-piece full-bore ball valves for corrosive fluids, steam, and chemicals.

True-union and standard solvent weld plastic ball valves designed for chemical resistance, smooth actuation, and zero corrosion.

Slimline wafer-style cast iron butterfly valves designed for bi-directional flow control with hand lever or worm gear actuators.

Standard-compliant bronze and cast iron gate valves with solid wedge discs and non-rising / rising stems for positive line isolation.

Zero-backflow check valves available in horizontal lift, vertical, dual plate, and swing configurations for pump protection.

Suction-line foot valves with integrated stainless steel / perforated cast strainers preventing de-priming and debris ingress.

In-line Y-type and bucket pot strainers with removable stainless steel mesh screens protecting valves and meters from sediment.

Automatic air release and vacuum relief valves expelling air pockets during line charging and preventing pipeline collapse.

Direct-acting diaphragm and spring-loaded pressure regulators maintaining steady downstream pressure in high-rise building risers.

Automatic liquid level control float valves with brass/SS lever rods and copper/polymer float balls for tanks and reservoirs.

Electromagnetic pilot-operated solenoid valves and precision needle valves for automated flow automation and metering.

Double-window cast iron and stainless steel in-line sight glasses with borosilicate glass for visual fluid inspection.

Hot-dip galvanized steel piping certified for commercial plumbing risers, fire protection loops, and heavy industrial fluids.

Heavy-gauge black mild steel welded and seamless piping engineered for structural supports, chilled water, and high-pressure steam mains.

Schedule 10 & Schedule 40 austenitic stainless steel piping for sanitary process loops, RO water, and chemical lines.

ASTM D2846 certified SDR-11 CPVC piping designed for hot and cold potable water distribution up to 93°C.

Lead-free Schedule 40 & Schedule 80 UPVC piping and deep-well submersible borehole column pipes with SS couplers.

Smooth-bore rigid PVC and ring-fit SWR pipe engineered for efficient soil, waste, and rainwater drainage without encrustation.

Deoxidized high-residual phosphorus (DHP) copper tubes for medical gas, VRF air conditioning, and premium plumbing.

Precision molded and threaded directional pipe elbows available across all major plumbing materials and sizes.

Three-way equal and reducing branching tees and 45° Y-branches for balanced flow distribution across commercial plumbing lines.

Full-line pipe couplers, male/female threaded adapters (MTA/FTA), and hex nipples designed for rigid longitudinal joints.

High-strength concentric reducers and stepped bushings for transitioning between differing pipeline diameters.

Heavy-duty slip-on, weld-neck, and threaded flanges with companion compressed fiber / rubber gaskets for detachable pipe joints.

Three-piece ground joint unions for easy pipe servicing, alongside durable threaded plugs and solvent-weld end caps.

UV-resistant PVC vent cowls, 45° shoe deflectors, and tapping service saddles for commercial building drainage stacks.

Heavy-duty synthetic yarn and steel/helix reinforced hoses engineered for water suction, compressed air, and fire hydrant lines.

Heavy-bodied solvent cements, anaerobic thread joint compounds, and 100% PTFE tapes for permanent, pressure-tight pipe bonding.

Barbed hose nipples, machine collars, and quick-connect pneumatic/water couplers in brass, GI, MS, and stainless steel.

Square and round ultra-slim AISI 304 stainless steel rain showerheads with rub-clean silicon anti-clog nozzles.

Heavy-gauge solid brass wall-mounted and ceiling-suspended shower arms with decorative flange plates.

High-flow concealed brass diverter bodies with single-lever temperature blending and multi-way shower output routing.

Ergonomic multi-spray hand showers with 1.5m double-interlocked stainless steel hoses and wall brackets.

AISI 304 stainless steel square and round floor drain gratings with removable anti-cockroach, odor-sealing cups.

Load-rated cast iron, FRP, and SFRC chamber covers for residential driveways, commercial basements, and stormwater manholes.

Full-thread and half-thread metric / imperial fastening bolts with companion hex nuts, double washers, and concrete nails.

High-load concrete anchor bolts and expanding sleeve fasteners for secure ceiling suspensions, pipe supports, and sanitary frames.

Heavy-duty rubber-lined and bare metal pipe hanging clamps, U-bolts, and pre-punched slotted channels for plumbing risers.

Continuous threaded hanging rods, solid round rods, and flat bars in GI, MS, brass, and 304 stainless steel.

UV-stabilized FDA grade multi-layer overhead and loft water storage tanks built for residential and commercial potable water storage.

Class-B multi-jet / Woltman inferential water meter with magnetically coupled vacuum-sealed register for accurate consumption billing.

Bourdon tube dial pressure gauge with bottom entry connection, available in dry and glycerin-filled options for pulsation dampening.

High-efficiency single and three-phase monobloc centrifugal pumps, borewell submersibles, and pressure booster systems.

Direct-on-line motor starters, thermal overload relays, 3-core submersible flat cables, and UV-stabilized self-locking nylon cable ties.

Ribbed elastomeric and cork-rubber composite vibration isolation pads for pumps, chillers, and heavy industrial machinery.

Rigid square welded wire mesh and safety netting in GI, MS, and 304 SS for pipe cages, drain trenches, and site partitions.

Wrapped and raw-edge cogged industrial V-belts (A, B, C, and Poly-F sections) for high-torque motor drive transmissions.

Duplex polyester webbing lifting slings (1 to 10 Ton) and heavy-duty polyurethane/cast iron swivel caster wheels.

Equal angle sections, heavy base plates, and composite industrial fabrication sheets in MS, GI, and aluminum.

AISI 304 stainless steel commercial D-handles, heavy bearing butt hinges, and mortise door locksets for commercial facilities.

Architectural 304 stainless steel and forged brass towel rails, heavy grab bars, soap dispensers, and paper holders.

Heavy forged chrome vanadium steel pipe wrenches, adjustable spanners, pipe dies, and pliers for plumbing installation and MRO.

Reinforced resin-bonded abrasive cutting discs, diamond core bits, and tungsten carbide SDS-Plus hammer drill bits.

Industrial safety helmets, high-grip gloves, heavy safety harness belts, and reflective traffic warning cones for jobsite safety.

Zinc chromate anti-rust primers, heavy industrial paints, WD-40 penetrant sprays, and EP2 lithium greases for equipment protection.

Tested 1.5 MPa spring-assisted bronze vertical check valve for non-return fluid protection. Nominal Bore: 15mm (1/2"). Packed and distributed by Sunrise Sanitary & Hardwares.

Tested 1.5 MPa spring-assisted bronze vertical check valve for non-return fluid protection. Nominal Bore: 20mm (3/4"). Packed and distributed by Sunrise Sanitary & Hardwares.

Tested 1.5 MPa spring-assisted bronze vertical check valve for non-return fluid protection. Nominal Bore: 25mm (1"). Packed and distributed by Sunrise Sanitary & Hardwares.

Tested 1.5 MPa spring-assisted bronze vertical check valve for non-return fluid protection. Nominal Bore: 32mm (1 1/4"). Packed and distributed by Sunrise Sanitary & Hardwares.

Tested 1.5 MPa spring-assisted bronze vertical check valve for non-return fluid protection. Nominal Bore: 40mm (1 1/2"). Packed and distributed by Sunrise Sanitary & Hardwares.

Tested 1.5 MPa spring-assisted bronze vertical check valve for non-return fluid protection. Nominal Bore: 50mm (2"). Packed and distributed by Sunrise Sanitary & Hardwares.

IS:778 compliant bronze horizontal lift check valve tested 1.5 MPa for zero reverse leakage. Nominal Bore: 15mm (1/2"). Packed and distributed by Sunrise Sanitary & Hardwares.

IS:778 compliant bronze horizontal lift check valve tested 1.5 MPa for zero reverse leakage. Nominal Bore: 20mm (3/4"). Packed and distributed by Sunrise Sanitary & Hardwares.

IS:778 compliant bronze horizontal lift check valve tested 1.5 MPa for zero reverse leakage. Nominal Bore: 25mm (1"). Packed and distributed by Sunrise Sanitary & Hardwares.

IS:778 compliant bronze horizontal lift check valve tested 1.5 MPa for zero reverse leakage. Nominal Bore: 32mm (1 1/4"). Packed and distributed by Sunrise Sanitary & Hardwares.

IS:778 compliant bronze horizontal lift check valve tested 1.5 MPa for zero reverse leakage. Nominal Bore: 40mm (1 1/2"). Packed and distributed by Sunrise Sanitary & Hardwares.

IS:778 compliant bronze horizontal lift check valve tested 1.5 MPa for zero reverse leakage. Nominal Bore: 50mm (2"). Packed and distributed by Sunrise Sanitary & Hardwares.

Full-bore bronze ball valve with multi-angle adjustable handle for confined plumbing installations. Nominal Bore: 15mm (1/2"). Packed and distributed by Sunrise Sanitary & Hardwares.

Full-bore bronze ball valve with multi-angle adjustable handle for confined plumbing installations. Nominal Bore: 20mm (3/4"). Packed and distributed by Sunrise Sanitary & Hardwares.

Full-bore bronze ball valve with multi-angle adjustable handle for confined plumbing installations. Nominal Bore: 25mm (1"). Packed and distributed by Sunrise Sanitary & Hardwares.

Full-bore bronze ball valve with multi-angle adjustable handle for confined plumbing installations. Nominal Bore: 32mm (1 1/4"). Packed and distributed by Sunrise Sanitary & Hardwares.

Full-bore bronze ball valve with multi-angle adjustable handle for confined plumbing installations. Nominal Bore: 40mm (1 1/2"). Packed and distributed by Sunrise Sanitary & Hardwares.

Full-bore bronze ball valve with multi-angle adjustable handle for confined plumbing installations. Nominal Bore: 50mm (2"). Packed and distributed by Sunrise Sanitary & Hardwares.

Certified IS:778 Class-1 bronze gate valve with non-rising spindle and cast iron handwheel. Nominal Bore: 15mm (1/2"). Packed and distributed by Sunrise Sanitary & Hardwares.

Certified IS:778 Class-1 bronze gate valve with non-rising spindle and cast iron handwheel. Nominal Bore: 20mm (3/4"). Packed and distributed by Sunrise Sanitary & Hardwares.

Certified IS:778 Class-1 bronze gate valve with non-rising spindle and cast iron handwheel. Nominal Bore: 25mm (1"). Packed and distributed by Sunrise Sanitary & Hardwares.

Certified IS:778 Class-1 bronze gate valve with non-rising spindle and cast iron handwheel. Nominal Bore: 32mm (1 1/4"). Packed and distributed by Sunrise Sanitary & Hardwares.

Certified IS:778 Class-1 bronze gate valve with non-rising spindle and cast iron handwheel. Nominal Bore: 40mm (1 1/2"). Packed and distributed by Sunrise Sanitary & Hardwares.

Certified IS:778 Class-1 bronze gate valve with non-rising spindle and cast iron handwheel. Nominal Bore: 50mm (2"). Packed and distributed by Sunrise Sanitary & Hardwares.

Certified IS:778 Class-1 bronze gate valve with non-rising spindle and cast iron handwheel. Nominal Bore: 65mm (2 1/2"). Packed and distributed by Sunrise Sanitary & Hardwares.